|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Preliminary Data Sheet rev. A PD-20555 07/00 30L30CT 30L30CTS 30L30CT-1 SCHOTTKY RECTIFIER 30 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM VF TJ @ 15 Apk, TJ = 125C (Per Leg) range Description/Features Units A V V This center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 C TJ operation Center tap configuration Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 2 x 15 30 0.37 - 55 to 150 C Case Styles 30L30CT 30L30CTS 30L30CT-1 TO-220 D2PAK TO-262 1 30L30CT, 30L30CTS, 30L30CT-1 Preliminary Data Sheet rev. A PD-20555 07/00 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 30L30CT 30L30CTS 30L30CT-1 30 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR Surge Current Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) 10 A Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Per Device Per Leg Values 30 15 1450 220 125 Units Conditions A A mJ 50% duty cycle @ TC = 140C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and Max. Peak One Cycle Non-Repetitive 10ms Sine or 6ms Rect. pulse with rated VRRM applied TJ = 25 C, IAS = 10 Amps, L = 2.5 mH Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) (1) Values 0.46 0.57 0.37 0.50 1.50 350 1500 8.0 10,000 (Per Leg) Units Conditions V V V V mA mA pF nH V/s (1) Pulse Width < 300s, Duty Cycle <2% @ 15A @ 30A @ 15A @ 30A TJ = 25 C TJ = 125 C TJ = 25 C TJ = 125 C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) Max. Junction Capacitance (Per Leg) Typical Series Inductance VR = 5VDC (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values -55 to 150 -55 to 150 1.5 0.8 2 (0.07) Min. Max. 6 (5) 12 (10) Units Conditions C C C/W DC operation C/W DC operation g (oz.) Kg-cm (Ibf-in) RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) wt T Approximate Weight MountingTorque 2 30L30CT, 30L30CTS, 30L30CT-1 Preliminary Data Sheet rev. A PD-20555 07/00 000 Reverse Current - I R (mA) 000 T = 150C J 100 10 1 0.1 0.01 0 5 10 15 20 125C 100C 75C 50C 25C 100 Instantaneous Forward Current - I F (A) 25 30 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 10000 T = 150C J J T = 25C Junction Capacitance - C T = 125C T 10 J (pF) T = 25C J 1000 1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 0 5 10 15 20 25 30 35 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 Thermal Impedance Z thJC (C/W) 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t 2 2. Peak Tj = Pdmx ZthJC + Tc 0.1 .01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 3 30L30CT, 30L30CTS, 30L30CT-1 Preliminary Data Sheet rev. A PD-20555 07/00 50 Allowable Case Temperature (C) Average Power Loss (Watts) 10 8 6 4 2 0 0 5 10 15 20 25 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics 45 DC RMS Limit D = 0.75 D = 0.50 D = 0.33 D = 0.25 DC D = 0.20 DC 40 35 Square wave (D = 0.50) see note (2) 30 0 5 10 15 20 25 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - I FSM (A) 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 1000 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) (2) Formula used: TC = TJ - Pd x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6) 4 30L30CT, 30L30CTS, 30L30CT-1 Preliminary Data Sheet rev. A PD-20555 07/00 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 1 2 3 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2 1.22 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 0.10 (0.004) 2.89 (0.11) 2.64 (0.10) BASE COMMON CATHODE 2 123 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. ANODE COMMON ANODE CATHODE 1 2 5.08 (0.20) REF. Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIR ECTION 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 1.75 (0.069) 24.30 (0.957) 23.90 (0.941) TRL 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 16.10 (0.634) 15.90 (0.626) DIA. 4.72 (0.186) 4.52 (0.178) FEED DIRECTION 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) 360 (14.173) DIA. MAX. 60 (2.362) D IA . MIN . SMD-220 Tape & Reel When ordering, indicate the part SMD-220 Tape & Reel number, part orientation, and the When ordering, indicate quantity. Quantities are in multiples the part number, part orientation, and the of 800 pieces per reel for both TRL andquantity. Quantities are multiples of TRR. 800 pieces per reel for both TRL and TRR. Dimensions in millimeters and (inches) 5 30L30CT, 30L30CTS, 30L30CT-1 Preliminary Data Sheet rev. A PD-20555 07/00 Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) BASE COMMON CATHODE 2 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 1 2 3 ANODE COMMON ANODE CATHODE 1 2 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) 2X 2.54 (0.10) 2X Outline Table Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) BASE COMMON CATHODE 2 1 2 3 ANODE 2 ANODE COMMON CATHODE 1 6 30L30CT, 30L30CTS, 30L30CT-1 Preliminary Data Sheet rev. A PD-20555 07/00 Ordering Information Table Device Code 30 1 L 2 30 3 C 4 T 5 -1 6 1 2 3 4 5 6 - 30 = Current Rating L = Schottky - L Series 30 = Voltage Rating C = Common Cathode T = TO-220 1 = TO-262 S = D2Pak 7 30L30CT, 30L30CTS, 30L30CT-1 Preliminary Data Sheet rev. A PD-20555 07/00 30L30CT *************************************************************************************************** This model has been developed by Wizard SPICE MODEL GENERATOR (1999) (International Rectifier Corporation) contains Proprietary Information *************************************************************************************************** SPICE Model Diode is composed by a simple diode plus paralled VCG2T *************************************************************************************************** .SUBCKT 30l30ct ANO CAT D1 ANO 1 DMOD (0.08936) *Define diode model .MODEL DMOD D(IS=3.01789428908089E-04A,N=1.12506549677918,BV=35V, + IBV=0.40837541124234A,RS= 0.000285952,CJO=3.65460570356249E-08, + VJ=0.934944724736772,XTI=2, EG=0.674450307828855) *************************************************************************************************** *Implementation of VCG2T VX 1 2 DC 0V R1 2 CAT TRES 1E-6 .MODEL TRES RES(R=1,TC1=11.2856367229303) GP1 ANO CAT VALUE={-ABS(I(VX))*(EXP((((-2.138249E-03/11.28564)*((V(2,CAT)*1E6)/(I(VX)+1E-6)1))+1)*9.434315E-02*ABS(V(ANO,CAT)))-1)} *************************************************************************************************** .ENDS 30l30ct Thermal Model Subcircuit .SUBCKT 30L30CT 5 1 CTHERM1 CTHERM2 CTHERM3 CTHERM4 RTHERM1 RTHERM2 RTHERM1 RTHERM1 .ENDS 30L30CT 5 4 3 2 5 4 3 2 4 3 2 1 4 3 2 1 3.53E-1 6.35E0 5.15E+1 4.08E+3 3.15E-1 6.15E-1 3.7E-1 1.98E-1 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: http://www.irf.com 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Data and specifications subject to change without notice. Fax-On-Demand: +44 1883 733420 8 |
Price & Availability of 30L30CT-1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |